Boom Poles

  • BUBBLEBEE INDUSTRIES PIECE-A-FUR

    0 out of 5

    The Piece-A-Fur gives you the opportunity to play with a piece of our specially produced wind protection faux-fur yourself. You simply cut out the Piece-a-Fur in the desired size and shape and use it when mounting a microphone. This might come in handy if you work with uneven or problematic surfaces like a hairy chest that creates friction noise when recording.
    Our high quality imitation fur is thich, soft and durable, and will cover the microphone to eliminate wind and other noises. It works very well with our Invisible Lav Tape – check out the product.
    The Piece-A-Fur comes in the following colors: Gray, Black, Brown, White, Off-White and Beige.
    Measurements: 36 cm x 11 cm (14.1” x 4.3”).
    Product warranty: This product is covered by a two-year warranty securing against defects in material, design and workmanship.

  • BUBBLEBEE INDUSTRIES THE SPACER KIT

    0 out of 5
    • Be prepared for ALL kinds of wind in just seconds.
    • Switch locations fast and always get the best transparency while blocking the wind noise.
    • Specially designed rubber base for super easy and secure mounting.
    • Base windshield made from highly efficient mesh.
    • Slip-on fur made from Bubblebee Industries’ best imitation fur (high amount of hair pieces per cm2) which allows for optimal frequency transparency.
    • Quick drying of the fur if it gets wet. You can just place it in the mesh bag.
    • Comes in seven different sizes – sure to find a size that perfectly fits your favorite shotgun mic.
    • Save valuable time while getting best quality.
    • Practical mesh bag included for easy storage and fast mounting.
    • Designed in Denmark by sound lovers, for sound lovers.
  • BUBBLEBEE INDUSTRIES WINDKILLER

    0 out of 5

    The Windkiller is a long-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others – see sizes below.
    The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully chosen soft and fluffy imitation fur on top. This faux-fur is highly durable, works excellent to block the wind and is aesthetically pleasing for the eye.
    In the buttom The Windkiller is constructed with a specially designed rubber mount that grips unto your microphone while still making it perfectly easy to slide the Windkiller on and off.
    The Windkiller comes in five different sizes, from XS to XL, all with an rubber opening in the buttom that fits shotgun microphones with a diameter of 18-24 mm (0.7”-0.9”).
    There are five different lengths:
    SIZE XS: LENGTH: 79 MM (3.1”)

  • K230TA2 – K-Tek Classic Traveler Graphite Boom Pole K230TA2

    0 out of 5

    This K230TA2 Traveler Klassic Boom Pole has a collapsed length of 4’2″ | 128cm and an extended length of 19’4″| 591cm and only weighs 2.8lbs | 1270g.

     

    This 6-section Traveler Boompole features an Internal Coiled Cable.

     

    The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR with up-facing wide Transmitter Adapter and Rubber bottom.

     

    K-Tek Traveler Klassic Boom Poles are constructed from high-density graphite selected for maximum strength and minimum weight.

     

    Eight layers of dent-proof graphite are precision ground and then burnished to produce a low handling-noise ?nish.

     

    Traveler Boom Poles are the perfect Boom Pole for frequent travelers and any situation where the Boompole has to pack up small but still extend to long lengths; this is achieved by having more sections with a relatively short collapsed length.

    Telescoping sections are connected with our proprietary locking system.

    The ?captive collet? is held within a collar. With just a gentle twist, the collar squeezes the collet to lock the pole in position. The collar has a aluminum sleeve studded with a unique dimple design that provides a pleasant touch and good grip under all conditions, even in extreme temperatures and humidity.

    The bottom coupling allows boom operators to attach a variety of accessories making all K-Tek Klassic Boom Pole modular. In today’s changing production landscape this future-proof modularity translates to versatily from shot to shot, scene to scene and location to location.

     

  • Hot

    KBB1 – Boom Box Multifunctional Boom Stand

    0 out of 5

    The Boom Box is a strong and versatile Microphone Boom Stand which doubles as an Apple Box to sit and stand on.

     

    The wooden box features numerous flush cut-out handles for easy carrying, and a large center cylinder for the boom pole. It is handmade in Southern California.

     

    Designed by professional Boom Pole Operator William Munroe, the Boom Box was created to fulfill a practical need on set.

     

    The Boom Box is a strong and versatile Microphone Boom Stand which doubles as an Apple Box.

     

    Not only does it provide an ingenious way to stand and store a boom pole on set, it also provides a dedicated working platform and station for the boom operator.

     

    At 13 pounds (5.9 kg) this versatile accessory is easy to move around, yet thanks to its hefty built-in center rib, it can support up to 350 pounds (159 kg).

     

    With dimensions of 12x12x20 inches, (30.5cm x 30.5 x 50.8cm) this useful wooden box features numerous flush cut-out handles for easy carrying, and a large center cylinder for the boom pole.

     

    Two sides are left solid to stand on. Finished with two coats of take-whatever-you-throw-at-it marine varnish, it resists sun and moisture for a long life on the set.

    Boom Box designer William Munroe explains, “I created the Boom Box because I needed it on the set based on my own location needs. Folks kept asking for it so now I am excited to see that by partnering with K-Tek, more boom operators around the world the can have access to the practical advantages it offers.”

    Each Boom Box is handmade, sanded and varnished in Southern California.

  • Hot

    KBLT35B – Boom Pole Case – Small

    0 out of 5

    K-Tek’s KBLT35B boom pole case is the perfect solution for carrying and storing your boom pole and other accessories:

    • Three sided case with a semi-hard clam-shell design
    • Made using a three-layer lamination process for extreme strength to weight ratio
    • Complete inside made of female velcro style hook & loop material
    • Three main interior straps for boom and three more interior straps for accessories
    • Interior Accessory Pouch included
    • Features ID tag widow, handles and shoulder strap

    The KBLT35B is a three sided case with a semi-hard clam-shell design with zippers and a removable inside pouch. This new boom pole case is made using a three-layer lamination process for extreme strength to weight ratio. The external black fabric is a rip-stop nylon.
    The inside features a removable pouch that is perfect for holding windscreens, shock mounts, cables, adapters, or anything you can think of. Three main fabric straps on the inside bottom of the case allow the end user to secure their boom pole on the inside, and three more straps on the inside at the top are great for securing things like cables, headphones, or even another boom pole. The KBLT35B features a shoulder strap as well as regular handles for easy carrying.
    The KBLT35B will fit any pole that has a minimum collapsed length of 35 inches or smaller. It was specifically designed for our K123 family of Klassic Traveller boom poles as well as our popular KE79, KE89 and KE110 families of Avalon Aluminum boom poles.

     

  • KE60 – K-Tek Avalon Aluminum KE60 Boom Pole

    0 out of 5

    This KE60 Avalon Aluminum Boom Pole has a collapsed length of 2’10” | 86cm and an extended length of 5’0″ | 152cm and only weighs 0.69lb | 312g. This 2-section Aluminum Boompole is uncabled.

    The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Delrin Base

    Using the Avalon knurled collars on K-Tek’s well-known locking mechanisms trusted by industry professionals worldwide, this boom pole is easy to transport and quick to deploy.

    K-Tek Avalon Aluminum: the economical alternative to Graphite

    The K-Tek Avalon Aluminum poles are crafted of black anodized aluminum with a smooth finish, the Avalon aluminum poles extend and collapse with ease.

    K-Tek Avalon: Practical Choice

    Made from the best materials available, the Avalon Aluminum pole is a practical choice. The options aren’t as modular or as vast as the Klassic line, but each model has a variety of cabling options. The base is made of Delrin and is ?xed to the bottom of the pole.

    K-Tek – Audio Products from Audio Professionals for Audio Professionals

    Deeply rooted in the Professional Audio Industry, K-Tek is a second generation family business. Proudly manufactured in Vista, California all K-Tek products are supported by Industry-leading after-sales-support provided directly from the factory.

  • KEG150CCR – K-Tek Avalon Graphite Boom Pole KEG-150CCR

    0 out of 5

    This KEG150CCR Avalon Aluminum Boom Pole has a collapsed length of 3’3″ | 99cm and an extended length of 12’6 | 381cm and only weighs 1.699lbs | 771g.

     

    This 5-section Aluminum Boompole features an Internal Coiled Cable.

     

    The top attachment is a 3/8″ – 16 male thread and the bottom attachment is a Male 3-pin XLR Side Exit with Delrin Base.

     

    Using the Avalon knurled collars on K-Tek’s well-known locking mechanisms trusted by industry professionals worldwide, this boom pole is easy to transport and quick to deploy.

     

    K-Tek Avalon Graphite: Lightweight & Durable

    The K-Tek Avalon graphite poles are crafted of the same high-density graphite used in the Klassic line with the same goal of balancing maximum strength and minimum weight.

    K-Tek Avalon: Practical Choice

    Made from the best materials available, the Avalon? Graphite pole is a practical choice.

    The options aren’t as modular or as vast as the Klassic line, but each model has a variety of cabling options.

    The base is made of Delrin and is ?xed to the bottom of the pole.

    K-Tek – Audio Products from Audio Professionals for Audio Professionals

    Deeply rooted in the Professional Audio Industry, K-Tek is a second generation family business.

    Proudly manufactured in Vista, California all K-Tek products are supported by Industry-leading after-sales-support provided directly from the factory.

     

  • KGPSS – General Purpose Microphone Suspension Shockmount (Short)

    0 out of 5

    Microphone Suspension; very versatile high tech suspension, using KSUS Suspenders:

    • Suspenders are spaced 2″ (5 cm)

    The K-GPSS is the shorter version of K-Tek’s General Purpose Microphone Suspension Shock Mount. It features a versatile suspension system based on the unique K-SUS polymer suspenders.

    It is a lightweight shock mount designed to fit a wide range of shorter microphones.

    The K-SUS Suspenders are spaced 2″ (5cm).
    Equipped with a swivel mount with standard 3/8-16 thread.

     

  • KMTS – KMount Microphone Shock Mount (short)

    0 out of 5

    KMount Short Microphone Shock Mount: The microphone is held firmly by two polymer KSUS Suspenders in a aluminum cage:

    • Mounts are spaced 1.1″ (2.8 cm) apart.
    • Mounts stretch to accommodate most shotgun mics.

    The short KMount Microphone Shock Mount offers additional protection for the microphone due to its tube-like aluminum microphone cage and offers a true 4-point suspension system based on K-Tek’s famous KSUS suspenders. This KMTS is the short version designed for shorter microphones.
    The tough microphone cage, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KMTS.
    With a machined aluminum cage, the microphone is actually held firmly in place by two polymer KSUS Suspenders spaced 1.1″ (2.8 cm) apart.

    The mounts stretch to accommodate most shotgun mics.

     

  • KSM Microphone Shock Mount

    0 out of 5

    Microphone Shock Mount: The microphone is held firmly in two polymer mounts:

    • Mounts are spaced 2″ (5 cm) apart.
    • Mounts stretch to accommodate most shotgun mics.

    The KSM Microphone Shock Mount is the workhorse for ENG crews worldwide.

    A tough design, strong grip on the microphone and superb vibration dampening are the qualities most loved about the KSM.

    With a machined aluminum frame, the microphone is actually held firmly in place by two polymer mounts spaced 2″ (5 cm) apart.

    The mounts stretch to accommodate most shotgun mics.